Skip to content
Search

Level Instruments

AMETEK’s Submersible Level Transmitters are one of the most complete lines in the industry for measuring industrial and water/wastewater plant level. From the low cost Model SDT with a light weight 316 Stainless Steel body that can measures levels up to 345 feet, to the Model 575 and 675 with a 316 Stainless Steel body and Hastelloy diaphragm that can measure up to 690 feet with CSA intrinsically safe approval for hazardous locations, such as lift stations, process sludge tanks, AMETEK offers a series of different products to meet your level needs.

Click here for a comparison of our level products.
  • level measurement
    LevelMate III Level System

    The AMETEK LevelMate III Level System uses a stainless steel transmitter as standard. A series of perforations in the bottom of the unit protects the sensing port from either clogging or damage. The same snub-nosed end can also unscrew, allowing for easy calibration checks.

    Keep Reading
  • pressure transmitter
    675 Shark Cage Submersible Level Transmitters

    AMETEK’s Model 675 Shark Cage Submersible Hydrostatic Level Transmitter has a non-fouling design for agitated liquid in lift stations, process sludge tanks, process sumps, or any application with slurry or highly viscous media. The Model 675 measures hydrostatic pressure with a 3.5-inch diameter 316 stainless steel diaphragm with a protective Shark Cage to reduce clogging and prevent damage. The 675 have +/- 0.25% full scale BFSL accuracy.

    Keep Reading
  • pressure transmitter
    375 Level Transmitter

    The AMETEK Model 375 level transducer is a low cost, light weight unit for clean water applications. A specially designed cable is factory installed and potted to insure liquid tight performance. The customer connection end of the cable is sealed and a desiccant package is installed to limit the amount of moisture allowed to enter the barometric reference of the sensor.

    Keep Reading
  • pressure transmitter
    575 and 575P Submersible Level Transmitters

    The Model 575 Series Submersible Level Transmitter has Intrinsically Safe approvals for water and wastewater level measurement in industrial and municipal facilities. This design has been on the market for over 20 years and provides reliable level monitoring for water and chemical tanks, reservoirs, wet wells, ponds, submersible pumps, and many other applications needing level measurement. The Model 575 measures hydrostatic level from 0 to 3 psi (0 to 7 feet) up to 0 to 300 psi (0 to 690 feet), in a rugged 316 stainless steel housing and diaphragm. It is available in the standard Snub-Nose version and a protected flush cage (575P) for sewage applications. The Model 575P comes with a Hastelloy C diaphragm for added durability. Standard output is 4-20 mA.

    Keep Reading
  • pressure transmitter
    SDT Submersible Level Transducer

    The SDT provides a lower cost, lighter weight option for submersible hydrostatic level applications. The simple design and rugged construction of this solid state instrument provide long lasting service with virtually no maintenance.

    Keep Reading
  • pressure transmitter
    SST Submersible Level Transmitter

    The Model SST Submersible Level Transmitter provides the same high quality level measurement capability as our other level products, but in a smaller package. The 0.69 inch diameter housing allows the unit to fit into small bore applications. The simple design and rugged construction of this solid state instrument provide long lasting service with virtually no maintenance.

    Keep Reading
  • pressure transducer
    LMA Lightening and Surge Protection

    AMETEK Model LMA Lightning and Secondary Surge Protection can be used for all submersible level transmitters and systems. The Model LMA is offered for both AC and DC protection, in 30 VDC, 120 VAC, and 240 VAC versions.

    Keep Reading